Protech Systems
Sudama Nagar, Indore, Madhya Pradesh
GST No. 23AAZFP2884Q1Z3
TrustSEAL Verified
Call 0804606021195% Response Rate
SEND EMAIL
Product Details:
| Accuracy | Class A |
| Temperature Range | -50 to 250 deg C |
| Sensor Connection Wiring | 2 Wire |
| Process Connection Type | Adjustable Compression fitting |
| Probe Material | Stainless Steel |
| Probe Diameter | 0.5 - 8 mm |
Temperature Range: -200 to 600 deg C
Accuracy: Class A
Sensor Connection Wiring: 2 Wire
Application: Industrial
Termination Type: Terminal Head Assembly
Process Connection Type: Threaded (NPT/BSP)
Product Details:
| Brand | Calex |
| Supply Voltage | 24 V DC +- 5% |
| Configurable Parameters | Sample period, number of samples, scheduled start date and time |
| Temperature Units | DegreeC or DegreeF configurable |
| Accuracy | General purpose models: +- 1 DegreeC or 1%, whichever is greater |
| Emissivity Setting | General purpose models: Adjustable, 0.20 to 1.00 / Short-wavelength models: Adjustable, 0.10 to 1.00 |
| Max. Loop Impedance (-CB and -CRT models) | 900 ohm (4-20 mA output) |
| Alarm Relays (-CRT and -BRT models) | 2 x Single Pole Changeover alarm relays, rated 24 V DC, 1 A, isolated 500 V DC |
| Data Logging Interval | 1 to 86,400 seconds (1 day) |
| Signal Processing | Average, peak hold, valley hold, minimum, maximum |
| Field of View | Choice of wide-angle or focussed optics (see Field of View Diagrams below) |
| BB and -BRT models | via RS485 Modbus |
| CRT and -BRT models | via touch screen |
| Response Time, t90 | 240 ms (90% response) |
| MicroSD Card | Max. capacity: 32 GB (not included, available separately) |
| Variables Logged | Target temperature, sensing head temperature, electronics module temperature, max, min, average, emi |
| Touch Screen Display Format | 2.83" (72 mm) resistive touch TFT, 320 x 240 pixels, backlit |
| Temperature Range | General purpose models: -20 DegreeC to 1000 DegreeC / Short-wavelength models: 100 DegreeC to 2000 DegreeC |
| Output | 4-20 mA or RS485 Modbus (Up to 247 sensors may be installed on a single Modbus network) |
| Repeatability | +- 0.5 DegreeC or 0.5%, whichever is greater |
| Emissivity Setting Method | CB models: via two rotary switches in electronics module |
| Spectral Range | General purpose models: 8 to 14 / Short-wavelength models: 2.0 to 2.6 |
| Maximum Current Draw | 100 mA |
| Internal Clock Battery | 1 x BR 1225 3V (not included) |
Product Details:
| Supply Voltage | 6 to 28 V DC |
| Baud Rate | 9600 baud (other configurations available upon request) |
| Configurable Parameters | Emissivity Setting, Averaging, Peak/Valley Hold Processing, Reflected Energy Compensation |
| Weight | 85 g ( With Cable) |
| Relative Humidity | 95% max. non-condensing |
| Accuracy | +-1% of reading or +-1 Degree C whichever is greater |
| Repeatability | +- 0.5% of reading or +- 0.5 Degree C whichever is greater |
| Spectral Range | 8 to 14 |
| Dimensions | 18 mm diameter x 45 mm long (excluding cable gland) |
| Environmental Rating | IP65 |
| Thread Mounting | M16 x 1 mm pitch |
| Cable Length | 1m (longer lengths available to order) |
| Temperature Range | -20 DegreeC to 1000 DegreeC |
| Configuration Method | Via PM180 touch screen, or directly via RS485 Modbus |
| Ambient Temperature Range | PyroMiniBus sensor: 0 DegreeC to 120 DegreeC including cable PMBHUB junction box: 0 DegreeC to 80 DegreeC |
| Response Time, t90 | 125 ms (90% response) |
| Modbus Data Format | 8 data bits, no parity, 1 stop bit (other configurations available upon request) |
| Interface | RS485 Modbus RTU |
| Emissivity | 0.2 to 1.0 |
| Supply Current | 50 mA max |
Product Details:
| Brand | Calex |
| Temperature Range | -20 to 1000 Deg C |
| Accuracy | +/-1 % |
| Maximum DC Input Voltage | Ui = 28 V |
| ATEX Classification | Ex II 1GD |
| IECEx Classification (Dust) | Ex ia IIIC T135 DegreeC IP65 Da |
| Ambient Temperature Rating | -20 Degree C / Ta / 70 Degree C |
| Maximum Input Power | Pi = 650 mW |
| Maximum Internal Inductance | Li = 0 mH |
| ATEX Certificate Number | CML 14ATEX2079 |
| TIIS Certificate Number | TC21097 |
| Maximum Internal Capacitance | Ci = 8 nF |
| IECEx Classification (Gas) | Ex ia IIC T4 Ga |
| Maximum Input Current | Ii = 93 mA |
| IECEx Certificate Number | IECEx CML 14.0032 |
Product Details:
| Switching Mode | NO/NC |
| Usage | for Industrial |
| Sensing Distance | 30 mm |
| Brand | As Per requirment |
| Output Type | AS per requirment |
| Material | Stainless Steel |
| Sensor Type | RF admintance type level switch |
| Supply Voltage | Universal |
| Switching Frequency | Fast |
| Hysteresis | 10mm |
| Connection Type | Cable |
| Number of Wires | 4 Wire |
| Body Material | As per requirment |
| Body Style | Rectangular |
| Degree of Protection | AS per requirment |
| Operating Temperature | As per requirment |
The capacitive point level sensor RFnivo® RF 3300 is used in storage and process vessels as a full, demand, and empty detector in all bulk solids from a DK value of 1.5. It operates at process temperatures up to +500°C and process overpressure up to 10 bar. Due to its "Active Shield" function any buildup does not in any way affect the accuracy of the measurement results of the sensor.
Your benefit
Product Details:
| Item Model Number | PyroNFC |
| Temperature range | 0 to 1000 DegreeC |
| Ambient Temperature Range | 0 DegreeC to 80 DegreeC |
| Brand | Calex |
| Response Time | 125 ms (90% response) |
| Accuracy | +- 1.5% of reading or +- 1.5C, whichever is greater |
| Emissivity | Adjustable via app |
| Relative Humidity | 95% max. non-condensing |
| Alarm Output | Open collector alarm output with temperature threshold and hysteresis, configurable via NFC |
| Field of View | 15:1 (see Field of View Diagram) |
| Min Temperature Span (Voltage Output) | 100 C |
| System Requirements | Android 4.1 to 8 |
| Configuration | Via Android app using NFC-equipped device (e.g. smartphone or tablet) |
| Max. Supply Voltage | 28 V DC |
| Max Temperature Span (Voltage Output) | 1000 C |
| Min. Supply Voltage (at Sensor) | 12 V DC (for 10 V output) / 6 V DC (for 5 V output) |
| Repeatability | +- 0.5% of reading or +- 0.5C, whichever is greater |
| Spectral Range | 8-14 |
| Max Current Draw | 6 mA |
| Temperature Output | Voltage: 0-5 V DC or 0-10 V DC output, linear with measured temperature, rescalable, configurable vi |
| Cable Length | 1 metre standard (longer lengths available to order) |
| Emissivity Setting Range | 0.2 to 1.0 |
Product Details:
| Item Model Number | Pyrocouple |
| Usage/Application | Industrial |
| Type | Non contact |
| Temperature range | -20 DegreeC to 100 DegreeC (LT models), 0 DegreeC to 250 DegreeC (MT models), 0 DegreeC to 500 DegreeC (HT models) |
| Brand | Calex |
| Ambient Temperature Range | 70 Degree |
| Material | SS |
| Response Time | 1 |
| Operating Voltage | 24Vdc |
| Output | 4-20ma |
| Accuracy | +-1% of reading or +-1 Degree C, whichever is greater |
| Output (Measured Temperature) | Two-wire 4-20 mA (-0 models) 0-50 mV (-1 models) Type J Thermocouple (-3 models) Type K Thermocouple |
| Optics | Choice of optics for small or large targets at short or long distances - see Field of View Diagrams |
| Output Impedance | 56 ohm (voltage/thermocouple output) |
| Supply Voltage | 24 V DC (28 V DC max.) |
| Spectral Range | 8 to 14 |
| Max. Loop Impedance | 900 ohm ( 4-20 mA output) |
| Output (Sensor Body Temperature) | 4-20 mA on power loop (models with output options 1 to 4 only) |
| Emissivity | Fixed at 0.95 |
| Repeatability | +- 0.5% of reading or +- 0.5 C, whichever is greater |
| Response Time, t90 | 240 ms (90% response) |
| Min. Sensor Voltage | 6 V DC |
Product Details:
| Type | RTD Sensor |
| Accuracy | +-1% of reading or +-1C whichever is greater |
| Response Time | 125 ms (90% response) |
| Material | Metal |
| Packaging Type | Box |
| Packaging Size | Standard |
| Country of Origin | Made in India |
Product Details:
| Item Model Number | PyroUSB |
| Brand | Calex |
| Ambient Temperature Range | 0 Degree C to 70 Degree C (cooling option available for use in higher ambient temperatures) |
| Output | Two-wire 4 to 20 mA (linear with temperature) |
| Accuracy | PUA2 models: +-1% of reading or +-2 DegreeC, whichever is greater |
| Response Time, t90 | 200 ms |
| Spectral Range | PUA2: 2.0 to 2.6 / PUA5: 5 / PUA8: 8 to 14 |
| Supply Voltage | 24 V DC (28 V DC max) |
| Sensor Voltage | 6 V DC min |
| Max Loop Impedance | 900 ohm 24 V DC |
| Repeatability | +-0.5% of reading or +-0.5C, whichever is greater |
| Emissivity Setting | Adjustable 0.1 to 1.0 via software |
| Configuration | Via PC port conforming to USB 2.0 |
| Operating System | Windows |
| Temperature Range For PUA8 models | -40C to 1000C |
| Temperature Range for PUA2 model | LT: 45C* to 300C / PT: 100C to 400C / MT: 250C to 1000C / HT: 450C to 2000C |
| Environmental Rating | IP65 |
| Temperature Range For PUA5 models | GLT: 50C to 1000C / GHT: 200C to 1650C |
| Maximum Span (analogue output) | Full temperature range |
| Minimum Span (analogue output) | 100 C |
Product Details:
| Item Model Number | PyroMiniUSB |
| Temperature range | -20 DegreeC to 1000 DegreeC |
| Brand | Calex |
| Response Time | 125 ms (90% response) |
| Dimensions | 18 mm diameter x 45 mm long (excluding cable gland) |
| Accuracy | +-1% of reading or +-1C whichever is greater |
| Weight | 85g (With Cable) |
| USB Cable Length | 1.5 m |
| Emissivity | 0.2 to 1.0 |
| Response Time, t90 | 125 ms (90% response) |
| Supply Voltage | 5 V DC |
| Termination Type | Cable |
| Configuration Method | Via USB using CalexConfig, CalexSoft 2, or other Modbus software (see Operator's Guide for Modbus de |
| Repeatability | +- 0.5% of reading or +- 0.5C whichever is greater |
| Supply Current | 50 mA max. |
| Baud Rate | 9600 baud (other configurations available upon request) |
| Modbus Data Format | 8 data bits, no parity, 1 stop bit (other configurations available upon request) |
| Protocol | Modbus over Serial Line |
| Interface | USB |
| Spectral Range | 8 to 14 |
Product Details:
| Accuracy | +-1% of reading or +-1 C, whichever is greater |
| Repeatability | +- 0.5% of reading or +- 0.5 C, whichever is greater |
| Emissivity | Fixed at 0.95 |
| Response Time, t90 | 240 ms (90% response) |
| Spectral Range | 8 to 14 |
| Min. Sensor Voltage | 6 V DC |
| Optics | Choice of optics for small or large targets at short or long distances - see Field of View Diagrams |
| Output (Sensor Body Temperature) | 4-20 mA on power loop (models with output options 1 to 4 only) |
| Supply Voltage | 24 V DC (28 V DC max.) |
| Max. Loop Impedance | 900 ohm ( 4-20 mA output) |
| Output Impedance | 56 ohm (voltage/thermocouple output) |
| Temperature Range | (LT)= -20 to +100 DegreeC/ (MT) = 0 to 250 DegreeC/ (HT) = 0 to 500 DegreeC |
| Output (Measured Temperature) | Two-wire 4-20 mA (-0 models) 0-50 mV (-1 models) Type J Thermocouple (-3 models) Type K Thermocouple |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Temperature Accuracy | +-0.5 Deg C |
| Sensor Type | Temperature Sensor |
| Brand | Dwyer |
| Model Name/Number | BTT |
| Type | Humidity & Temperature Sensor |
| Usage/Application | Building automation system |
| Temperature Range | -40 to 150 degree c |